Earring Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Earring stand with a nice, simple design.
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 262
- Wydruki
- 3
- Wyświetlenia
- 1172
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This earring stand allows you to easily store up to 90 earrings. You can take out each insert separately - easy handling is guaranteed!
The base on the images was printed using following parameters:
Color: Prusament PLA Marble Grey
Layers: 0.4mm nozzle with 0.2mm layer height
Supports: no supports & raft needed
Infill: 15%
You might want to add a brim so the base does not lift during printing.
The inserts on the images was printed using following parameters:
Color: Prusament PETG Signal White
Layers: 0.4mm nozzle with 0.2mm layer height
Supports: no supports & raft needed
Infill: 15%
All parts were printed on a Prusa MK4. Happy printing!
Feedback is always appreciated - leave a comment down below. Cheers!