Nerf Talon Magazine TPU Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps protect nerf talon magazines from being damaged from ejection onto hard surfaces. Recommended to print in TPU
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 366
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Protect your talon magazines from harsh ejections and accidental drops on hard surfaces! This should also help reduce instances of spontaneous magazine disassembly.
All four tabs inside the part should engage with the four holes towards the bottom of the talon mag to retain the bumper on the end of the magazine. If it looks like its bulging outwards, one of the tabs may not be fully seated.
I recommend printing this out of TPU, I have not toleranced nor tested it for harder filaments like PLA or PETG. See 3mf file for recommend print settings, walls and infill should be thin enough to allow the TPU to compress and absorb impact.
If you find this file useful, come say hi and cheer for team Magic Smoke at your next competitive event :)