1 / 3
Travel Harry's Razor Handle and Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortened Harry's razor handle for travel with a minimal cover
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 113
- Wydruki
- 2
- Wyświetlenia
- 439
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- GNU General Public License v3.0
I've been trying to pare down my travel dopp kit so that I can travel lighter, but I didn't want to give up my razor. This handle reuses the attachment mechanism from hwmonkey's design, but with a redesigned handle that's a bit easier to print and a lot shorter. The cover is from DT's parametric design.
For printing the handle:
- I recommend the automatic setting in the paint-on-supports tool in Prusaslicer, which should just add a small support to the slider
- I used standard supports, but would recommend organic supports on the build plate only to minimize cleanup
- 0.4 mm nozzle and 0.1 mm layer height
- I used PETG, but I do not see why PLA/PLA+/ASA wouldn't work
- The print in the photos used fuzzy skin with 0.1/0.1 settings just up to the top of the handle
For the cover I used 92A TPU with a 0.4 mm nozzle and 0.2 mm layer height. PETG may have enough flex to work as well.