Super Qidi Plus 4 Lid Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because Bigger is Better Right? o_O
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 174
- Wydruki
- 5
- Wyświetlenia
- 648
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Super Qidi Plus 4 Lid Spacer - Because Bigger is Better Right? o_O
I originally created this huge spacer as a joke. And now it is what I use everyday. lol
Someone reached out to me from the Printables community wanting an even longer lid spacer for their Qidi Plus 4. So now you have options.
"In order to print PLA, you need to vent the chamber." Leaving the front door open is no longer necessary.
There are fancier devices out there to achieve this same task, yet I find myself using this. This is a stupid simple design, super easy print that just works.
[Update 08-26-2025]
Added V5 of the +200mm thicker lid prop. I was having some small bending issues due to the length. There are two new models available.
There are three longer lid spacer files included. +100mm, +150mm and a ridiculous +200mm extended lid spacer. I am actually using the middle sized or 150mm spacer myself which I printed in ASA. It opens the lid enough for me to grab small parts out through the top without even having to open the door. I guess that could be convenient for someone. If the print head smacks your hand during a print, it will pause (don't ask). Chamber stays around 28°C for me.
Print PLA or whatever, etc, 0.2LH, 4-6 walls, 50% Cubic, Gyroid, 3D HoneyComb. No supports needed.
I recommend 6 walls for the +200mm lid spacer.
Please leave a “Like”, Thanks for downloading