Core One Camera Mount for Lgitech C270
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple corner mount for a Logitech C270 camera in the Core One
- Ocena
- 4,857 / 5
- Polubienia
- 57
- Pobrania
- 240
- Wydruki
- 9
- Wyświetlenia
- 1802
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple solution to mount a Logitech C270 in the corner of the Core One.
Since I have used this type of webcam all these years with my MK3/4 and Octoprint and the BudyCam is not usable with Octoprint, I decided to design this mount.
New Version , with a better view :-)
I decided change the design to a modular one. Now you need to print two part and screw (or glue) them together.
You need :
- 3 magnets 5x5mm
- a little bit of superglue
- 1 screw M3x30 (minimum length 25mm)
- 3 countersunk screws M2x6
The holes for the magnets are slightly larger (diameter and depth) than necessary, so you definitely have to glue them in.
Caution: Please check the photo about the provided viewangle.