1 / 1
Claribugle — zdjęcie 1

Claribugle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your clarinet into a bugle with this unique bell!

Ocena
0 / 5
Polubienia
4
Pobrania
47
Wydruki
0
Wyświetlenia
746
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

The Claribugle

The inspiration for this comes from the booklet “Daily Practice For Clarinet” by John Theine. I'll leave an exerpt below on how to utilise it best.

Theine recommends closing the bell with your leg, but this leads to an awkward playing position. By utilising The Claribugle you can do this excersise standing up or sitting more comfortably.

Bugle Exercises

This helps develop flexibility in the embouchure similarly to the sirens, but is more concrete in

pitch. Using a tuner is a good idea to help lock into pitch. In order to bugle on a clarinet, you

need to:

  • Use the Claribugle
  • Finger a low E
  • Blow (hard)...you are after a high pitch...if a muffled B or nothing comes out, you aren’t blowing hard enough.

In order to change pitch, experiment with lifting your tongue and dropping your chin while

maintaining your air speed. Your should be able to get several note out. Bugle patterns are

listed below for several standard bugle songs. (The actual notes you play may be different, but

the patterns are listed here). Pick one a day (or more) and play through them.

 

Printing

This is modeled after a Buffet RC Prestige, and the bell tenon diameter is set to 26.7mm

You might have to adjust the X-Y hole compensasion in your slicer to get a good fit.

Otherwise, it should print fine with no supports and no brim/skirt.

Tagi