1 / 4
Clip-top / snap-top "pickling" jar seal (gasket)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU seal / gasket for pickling jar
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Parmetric clip-top jar seal
To print, use TPU, top and bottom shell thickness of 0.7mm, wall thickness of 1.6mm and 30% infill to reduce stiffness.
SCAD file has all needed parameters (in mm). Defaults are set to the more common Kilner type jars.
(inner diameter is shrunk 1% to allow for a snug fit).
