WaveShare 13.3"E 6-color e-ink Spectra parametric case with kickstand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric case with a kickstand for the WaveShare 13.3"E display.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1095
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a parametric case for the WaveShare 13.3"E e-ink Spectra panel.
The STL files have case depths of 6mm (pictured), 8mm, 10mm, 16mm and 24mm. I've also included options for both vertical and horizontal printing.
Do not use any supports as they will clog the kickstand. The pictured case is printed vertically with 0.2mm layer, 0.4mm nozzle on a Bambu X1C. I had to rotate it to make it fit. I had to use the SuperTack plate with a raft to get it to not curl on the bottom. There was warping on the top no matter what I tried (rotation, speed of print). In the end I got the best results when printing with 100% infill and carefully warping it back with a heat gun.
You will need M2*4*3.5 heat set inserts for the cover, and M2 screws to screw it in from the back.
Change the parameters and download a perfectly sized case at: https://cases.frameos.net/ - also available in other sizes.