Saturn 3 Ultra Magnetic Vent Adapter for 4" Dryer Vent Hose/Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.thingiverse.com/thing:6408339It consists of 3 parts (plus a cap) and will allow you to…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of https://www.thingiverse.com/thing:6408339
It consists of 3 parts (plus a cap) and will allow you to create a magnetic connection for a 4" dryer vent hose/duct to your Saturn 3 Ultra.
Required parts for just this print:
- 4x M3 brass inserts (M3x5.7
- 4x 12mm M3 screws
- 8-24x 6mm x 2mm N52 Round Disc Magnetics
The parts I used for my Ventilation System include:
- https://www.amazon.com/dp/B0CNVSRN2Y
- https://www.amazon.com/dp/B09MVG2DT8
- https://www.amazon.com/dp/B0C7Z82L7P NOTE: the silver hose that comes with the window kit is non-standard and will NOT fit on the inline fan or 3D printed adapter. The black hose works great. I cut the black hose and used hose clamps to install the fan inline.
The original used a separate 3" to 4" adapter and 4" dryer vent hose adapter to convert the Saturn 3 Ultra's vent port to the 4" dryer vent hose.
I combined the two parts into one creating a single component that will magnetize to magnet plate bolted to the Saturn 3 Ultra.
I also converted the 6mm x 3mm magnet holes to 6mm x 2mm magnet holes.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1P
No
Supports:
Yes
0.4mm
Infill:
25
Category: 3D Printer Accessories