Jumbling Towers (Jenga) Aligner Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game didn't come with one.
This sleeve is designed for 48 blocks, that are each 2.85" x .95" x .55" (72mm x 24mm x 14mm), making a tower 16 rows high.
It even fits in the original game box with the blocks!
For Game Gallery's Jumbling Tower from Target the overall size should be 3.05" x 3.05" x 8.9" (77.47mm x 226.06mm x 226.06mm)
May also work for Jenga, Jumbling Tower, Toppling Tower, Tumbling Timbers, Tower Stacking Game, Tumbling Tower, Stack 'Em. Other Jenga-type games may require different scaling.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1P
No
Supports:
No
.4
Infill:
100
Notes:
Obviously designed for FDM. Does not require supports. Print laying down on a long side.
Category: Toy & Game Accessories