Alpakka Controller Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for an Alpakka controller.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
A stand designed to hold and display your Alpakka controller while it's on break. The width is slightly smaller than the middle portion of an Alpakka in order to keep it balanced and hide any off-center placements.
The “multi_material” file should allow you to print the stand and logo as a single object with different colors/materials; I can't test this with my printer, so good luck. For those of us with single-material printers, you can print the inserts separately and just push them into the cutouts.
To print:
- lay the stand on its left (or right) side
- lay the logo insert on its back (or front) side
- the “multi_material” stand is already oriented, so just specify the colors/materials
Any other settings depend on your printer and personal preference. For example, I printed mine in PLA with no brim or supports, but some “hanging” is visible in the cutouts.