Air Jordan Wings Logo 2D Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(NOT MINE) (ALL CREDITS TO ajb11 ON THINGIVERSE). Just a Air Jordan Wings Logo!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
This is an extruded model of an old fashioned Air Jordan logo. It fits in a constraint box roughly 7.5 cm by 3.5 cm. There are 4 different layers of extrusion, as each layer of wings is extruded 0.2 cm higher then the next. The ribbon is included in the first layer, and the final layer contains just the basketball. We also included 2 different extruded cuts, one for the lettering and one for the lines on the basketball.
In the final printed product, for the most part the piece came out pretty good except for some failure on the small detailed letters and basketball lines. Because of this, I recommend when printing scale by at least 150% of the original STL file