1 / 1
Mobicool MV26 Grid for Floor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is always some condensed water on the bottom of the cooling box and I don't want my food lying inside it. This is a Grid to put inside, so the food is distanced about 5mm to the bottom of the cooling box.
Total Inside measurements: 32x23cm
I had to split it into 4 parts because otherwise it's to big for my PrusaMINI.
I know it's just 1 Part, but you can mirror it in PrusaSlicer and then you can make all 4 of them.
Print Settings
0.25mm Draft Setting for PrusaMINI in PrusaSlicer (But with Gyroid infill)
Infill: 20% (Standard with Draft Setting but I think less is also possible. You could save some time…)