LACK stand for MK3 with MMU2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When the MMU2 is added to the mk3, the filament spools can take up a lot of room.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 1346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
When the MMU2 is added to the mk3, the filament spools can take up a lot of room. I don't need an enclosure, but the IKEA LACK table is still a useful item for building a stand to hold the printer and filament spools, plus I've tucked a dry box underneath for soluble support material. This thing allows you to stack two LACK tables with enough space between them for the mk3 plus MMU2 (including a horizontal mount; see my other things). The spool holders that come with the MMU2 don't work especially well with this setup (or with any other); see my other things for one option that does.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: No
Resolution: 0.35 mm
Infill: 10%
Filament: Generic PETG any
Notes:
Print accuracy is not especially crucial here; there is a set of bridges in the leg extensions to hold the leg in place but these are short and not difficult to print.
Post-Printing
The leg caps are to be assembled as part of the lower LACK table, between the leg and the top. The leg extensions slip into them; the caps ensure that there's no room for the upper LACK legs or extensions to splay out or slip aside.