Scosche Magsafe Replacement Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a replacement nut for setting the position of the MagSafe plate on the Scosche MagicMount Pro2 Window/Dash
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 188
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an M20 x 1.5 nut with a spherical narrowing at the bottom. It is a replacement part for the Scosche MagicMount Pro2 Dash/Window. The original nut broke. It gets hot where I live and I don't think the plastic they used for the original nut was up to the challenge of heat AND the stress applied to it. This nut ends up being an upgrade anyway as it's slightly larger in diameter and has better star features for grip.
I recommend printing this out of ABS or ASA, but PETG can be a permissible alternative as well. Avoid PLA.