Dust Cap for Fuse (Vapouriz) Vape Battery - TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop your spare batteries getting dust and pocket fluff in the connector!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the larger batteries available for this vape kit have the same connector, the cap should fit those too, although I don't have any available to test it on.
I carry around spare batteries for my Fuse Vape, but they can collect dust and fluff in the connector which affects the electrical contacts.
So I designed a simple dust cover for printing in TPU as that can just be pressed over the end past the fine threads of the connector.
I toyed with the idea of making some sort of clip mechanism which would allow the dust cover to be attached easily to a keyring rather than kicking around loose in a pocket. But then I realised if I've got one cap per SPARE battery then I can swap the cap onto the battery I want to swap out, so all batteries remain capped and no loose caps anywhere.
Print in TPU open end upwards, no adhesion or support, pretty much any print settings will do except vase mode!
Mine is printed in Eryone Clear 95A Shore TPU but any TPU should be fine.
I also designed a simple printable tool for cleaning out the contact areas inside the connector, as that's difficult to clean effectively with a tissue, brushes don't get in there well either. Small amounts of residue from the vape seem to dirty the contacts so cleaning them effectively will lengthen the usage life of the battery. The link to that cleaning tool is here…
I'm also considering designing a cap for spare clearomisers, as the one that comes with them is not great - it's effective but fits so well that it can suck/blow air as you remove/place it and cause a drop of juice to leak out and make a mess! Needs to be captive but with channels so it doesn't move any air through the tube. Best way to find out when that gets published is to follow me, then you should get a notification when it arrives, but it could be a while!
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)