1 / 3
GEPRC Cinelog 25 v2 battery tray / Batteriefach — zdjęcie 1
1 / 3

GEPRC Cinelog 25 v2 battery tray / Batteriefach

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eine Ergänzung zum originalen Batteriehalter. Die Batterie kann sicher in Flugrichtung verspannt werden.

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Der Batteriehalter wird an die originalen verschraubpunkte mit den Original schrauben befestigt. Mit dem Halter ist es möglich die Batterie in Flugrichtung anstatt quer zu montieren. 

Es gibt zwei STL dateien eine “Light Version” ca. 5g und eine normale version ca. 10g. Die dateien wurden jeweils aus TPU mit 15 Prozent infill gedruckt. 

Akkus die ich verwende sind 4S Tattu R-Line 850mah und 650mah.

 

The battery holder is attached to the original screw points with the original screws. With the holder it is possible to mount the battery in the direction of flight instead of horizontally. 

There are two STL files, a “light version” weight. 5g and a normal version weight. 10g. 

The files were each printed from TPU with 15 percent infill.

Batteries I use are 4S Tattu R-Line 850mah and 650mah.

 

Tagi