Phobos Moon Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A moon lamp based on Phobos, one of the moons of Mars.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 1325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Overview
A moon lamp based on Phobos, one of the moons of Mars.
I wanted to see if I could create a moon lamp based off of a different moon. I found a 3d model of Phobos (link below) and turned it into a printable hollow shell with a base on the inside to hold a small light.
Printing/Assembly
The outer shell is designed to be solid when printed with at least 2 outer walls. Parts of the base will require infill. I printed it with 10% infill without issues.
I printed the model with supports. It was difficult to remove some of the support material form the inside, and I had some minor surface finish issues. So I would recommend keeping supports to a minimum.
The opening in the bottom is designed to fit a small lamp commonly used in holiday decorations. I have link to the specific one I used below. The opening ended up being a little small, so I had to bend the bracket on my light slightly to get everything to fit.
Links
I found the 3d model of Phobos here: https://3d-asteroids.space/moons/M1-Phobos
The lamp cord I used: https://www.amazon.com/dp/B000VX6A5K/ref=cm_sw_em_r_mt_dp_E6NT54N9AY6Y5T2JN262
I used an led bulb instead of the one that came with the cord.