1 / 4
Suntour HL-3000 "Head Binder" Cable Stop Shim for 1" Quill Stem
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Splined shim for using a Suntour HL-3000 cantilever brake cable stop on a 1" quill stem shaft
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu of that locknut, you can use this shim!
Printed at 0.2mm layer height with a 0.4mm nozzle from PLA.