modified ratcheting screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ratcheting screwdriver without the ltt logo.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
ratcheting screwdriver without the ltt logo. i used tree supports for the whole model. use 100% infill for the ratchet and the bit holder. turn on detect thin walls so that the bit holder and the ratchet print correctly because otherwise they will snap very easily or print incorrectly. i suggest using a 3d pen to bond the 3d prints together. i used a hammer to get the bit extender in place. make sure that you get the bit extender in straight or you will have to take it out and reprint the ratchet part. i need to work on getting the bit holder to be a tighter fit in the screwdriver and need to combine the bit holder and the cap together to make it more stable but otherwise it prints well. the only thing that bothers me is that the bit storage rattles around inside while using it, which can get very annoying very quickly.
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu X1C
**Rafts:**
No
Supports:
No
**Resolution:**
0.16
Infill:
20%
Category: Hand Tools