SMD Strip bin for Mx SMD Roll
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of two great products: Mx SMD component strip holder https://www.thingiverse.com/thing:2186862 SMD…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a remix of two great products:
Mx SMD component strip holder
https://www.thingiverse.com/thing:2186862
SMD Strip Dispenser Tray for Mx SMD Roll
https://www.thingiverse.com/thing:2717152
I was really impressed by how these two products came together. When I was testing out the holder, a few SMD pieces fell out of the strip, and I had nowhere to save them alongside the strip storage container they belong to. I did see that Mx also has an insert for such storage, but I didn't want a separate box for just a few loose pieces.
My solution was to stretch both the original strip holder and the dispenser cover to allow for a bin that could hold the loose pieces. When closed up, you'll have the loose and sealed pieces all in one spot.
After printing my sample, I added a label to the "top" side so that you don't accidentally open the container upside-down and spill those little SMD pieces everywhere. There's also a small recess to put a printed label or sharpie marker label on that "up" side.
Print instructions
Unassociated tags: mx smd, smd storage
Category: Electronics Print Settings
Printer: JG Aurora A3
Rafts: Doesn't Matter
Supports: No
Resolution: Finer is better, but up to you
Infill: 20%
Notes:
No real special requirements for these prints. Like the original, the cover does need to print a few 5mm spans/overhangs, so make sure your settings support that.