Subaru 2006 WRX Tweeter grilles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are covers for the trim holes where the tweeter speakers are installed. Two options depending on your needs.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
May 26, 2025 - uploaded new versions with slightly beefed up top and bottom clips.
If you download this, let me know how you plan to use them.
if you need a custom variation designed let me know and I can try to help.
These are covers for the door trim cutouts where the OEM tweeter speakers are installed. I have provided two options depending on your needs:
- One option has no holes.
- This would be used if you are completely removing the tweeter speakers from your upper doors.
- Or if you want to use the STEP file to create a custom design for holes for sound or custom aesthetic, etc.
- One option has holes and a flat circular area meant to match up with Kicker tweeters that I purchased as part of the KSS50 speaker kit. The speakers that I purchased come with small mounting pods and since the tweeters are too large to fit in the doors, I designed these replacement grille covers as a place to mount the external tweeter pod stalks.
- The shape is not perfect, but it's pretty dang close.
Notes about printing:
- Supports: you will need to use supports to print this. I needed to use grid support type when printing due to the shrinkage of the PLA Pro material that I am using. I initially used other support types and the part did not fit properly and tapered in, causing a bad fit and frustration for me. Once I switched to grid support, the part held its shape.
- HOWEVER, the supports are/will be a real PITA to remove.
- So review your support interface distance settings, etc. Good luck.
- Line directions: in your Slicer, review the topmost/outermost layers that will be visible when installed in your car. Adjust the set of line directions so that the lines end up going the right way once the grilles are installed. I chose to mirror the line directions so that the lines face down and to the front of the car (different directions for left and right grille).
Please see the pictures for what they look like installed and the OEM part they're modeling. I've only printed the ones with the holes for the speaker pod stalks since that's why I started this whole journey of designing the parts.