1 / 3
Neoprene boots and gloves drier - no heat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boot drier, 33mm pipe. Using mostly for neoprene boots and gloves with simple fan attached to it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
You are going to need to print the base, 4 pipes and probably 2 top corners(for boots).
Also you are going to need to buy a small fan. I am using “120mm Small 12Volt Electric BBQ Blower Fan with Adjustable Controller…”