Little Robot Planter (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little Robot Planter friend that is 100% printed in place. Only takes 16g and prints in about 2h.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 227
- Wydruki
- 3
- Wyświetlenia
- 938
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
First try printing TEST_PRINT_robot_PIP_v1_leg.stl, before printing the full model, to confirm your printer can handle the leg joint tolerances. When slicing the model yourself, do make sure the leg joints print as separate walls and not as single solid part (see last picture). The joints are designed to be tight in order to hold the robot in any position.
PLA is confirmed to work. You could print it in PETG if you want to use it as a fidget toy, so the joints last longer, but first make sure that TEST_PRINT prints and functions fine.
Little Robot Planter friend that is 100% printed in place.
You could also use it as a small parts container or just as a desk decoration.
Only takes 16g and prints in about 2h.
The default 100% scale variant's pot has inner diameter of 30mm and inner height of 32mm.
There are 150% and 200% scale variants aswell with adjusted tolerances.
Do let me know in the comments if you encounter any issues while printing.