1 / 2
Spiral Bowl Twisted Bowl, Fruit Bowl
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative bowl
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 501
- Wydruki
- 6
- Wyświetlenia
- 1195
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (93)Powiązane
1. Set Infill to 0%
- Go to Print Settings → Infill → Set to 0%
- This removes the internal fill, but the walls remain thick.
2. Adjust Wall Thickness
- In the Shell / Perimeters section, modify the wall thickness:
- Wall Loops / Perimeters – set to 2–3 layers (e.g., 1.2–2 mm thick).
- Top/Bottom Layers – if you want an open bowl, remove the top layers.
Scale up the bowl as needed
