1 / 4
Shy Alien PiCam v3 Mount for 2020 extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pi cam v3 mount
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed a Picam3 Mount that wasnt boring and doubles as a feature.
I made it look like a little alien.
Some key Features include:
- Alien Esthetics
- 3 parts for extension
- Takes Pi5 and Regular Pi cables.
- has tabs to hold your ribbon cable and still have it as a feature.
- can be turned and adjusted in pretty much any direction.
- added Visor for light glare.
- great for Picamv3 wide and regular.
Takes m3x10-12 screws. m3x8 screws on the hinges or you can stick a screw all the way through and add a nut. up to you.
use the original screws from the Pi3 to mount it. or use m2 self-tapping screws.