1 / 5
Technic liftarms for Lego Space Shuttle (10283) mount — zdjęcie 1
1 / 5

Technic liftarms for Lego Space Shuttle (10283) mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model provides the necessary parts for fitting the Lego Space Shuttle to a specific wall mount.

Ocena
0 / 5
Polubienia
4
Pobrania
27
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution

The model https://www.printables.com/model/109571-lego-space-shuttle-10283-ceiling-mount allows to mount the Lego Space Shuttle in a more stable manner compared to other mounts. Thus the shuttle can be placed on walls or ceilings in various positions. This model builds on this approach by providing Technic liftarm prints to replace the landing gear of the shuttle for a cleaner look and even more stability.

 

For installation, nose and wings have to get partly disassembled to reach the side of the axles holding the gear and replacing it with the printed parts. The front part is only required once, the rear part is used four times – the pictures should provide enough information on how to place them. As the printed parts have the exact width of the landing gear housing, the weight of the shuttle is evenly transferred to the mount. You can leave the gear retraction mechanism intact or remove them.

Tagi