Element System mount for Kistenberg Truck storage bins KTR20 & KTR12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Element System mount for Kistenberg Truck storage bin KTR20 and a remix of of the mount for KTR12 from Vookimedlo
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I was in need of mounting brackets for Kistenberg Truck storage bins KTR12 and KTR20 and found the version of Vookimedlo quite usable. The mounts should fit to the Element System wallpanel or any panel with 45mm distance between the keyholes.
Therefore i refined the model for the KTR12 version and created a version for the KTR20.
On the KTR20 mount you can decide by yourself if you would like three hangers or only two hangers at the backside. Delete the middle hanger in prusa slicer if desired before printing.
Printing instructions:
- 0.4 nozzle
- 0.2mm Speed
- 15% infill
- supports needed for the backside hangers, set ‘For support enforcers only’ and use automatic painting (see picture below for example)
