Nozzle Cleaner ender 3 v3 ke UPDATED READ INFO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle Cleaner ender 3 v3 ke using a Bambu silicon wipe PS the g-code is for Creality slicer.
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 647
- Wydruki
- 4
- Wyświetlenia
- 3179
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NB I made an update on the original so it does not hit the brush when you do a auto bed level.
Now this part
G1 X87 Y-16 Z4 F5000.0 ;Wipe 1G1 X46 Y-16 Z4 F5000.0 ;Wipe 2
G1 X87 Y-16 Z4 F5000.0 ;Wipe 3
G1 X46 Y-16 Z4 F5000.0 ;Wipe 4
G1 X87 Y-19 Z4 F5000.0 ;Wipe 5
G1 X46 Y-19 Z4 F5000.0 ;Wipe 6
G1 X87 Y-19 Z4 F5000.0 ;Wipe 7
G1 X46 Y-19 Z4 F5000.0 ;Wipe 8
looks like this FOR ME.
G1 X87 Y-16 Z1.5 F5000.0 ;Wipe 1G1 X46 Y-16 Z1.5 F5000.0 ;Wipe 2
G1 X87 Y-16 Z1.5 F5000.0 ;Wipe 3
G1 X46 Y-16 Z1.5 F5000.0 ;Wipe 4
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 5
G1 X46 Y-19 Z1.5 F5000.0 ;Wipe 6
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 7
G1 X46 Y-19 Z1.5 F5000.0 ;Wipe 8
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 9
As you see the z height has come down
Start at the code as below and work your way down
I also added a wipe 9 so the head does not go back and pick up the poop again.
Nozzle Cleaner Ender 3 v3 ke
I used the clip side of @AlehandoroVR
https://www.printables.com/model/742343-ender-3-v3-ke-and-se-automatic-nozzle-cleaning-bru
add this to your Startup g-code (This is a start. Z at 4 should be to high and work your way down as above 1.5 worked for me)
PS i use creality and if you go to the ip of your printer you will see where your X, Y and Z is
Have Fun!!!!
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temp
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp
G1 X1 Y-18 Z3 F5000.0 ;Line up with brush
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize
G1 X87 Y-16 Z4 F5000.0 ;Wipe 1
G1 X46 Y-16 Z4 F5000.0 ;Wipe 2
G1 X87 Y-16 Z4 F5000.0 ;Wipe 3
G1 X46 Y-16 Z4 F5000.0 ;Wipe 4
G1 X87 Y-19 Z4 F5000.0 ;Wipe 5
G1 X46 Y-19 Z4 F5000.0 ;Wipe 6
G1 X87 Y-19 Z4 F5000.0 ;Wipe 7
G1 X46 Y-19 Z4 F5000.0 ;Wipe 8
G1 X40 Y-18 Z15 F5000.0 ;Raise to clear brush
G1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position
G1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little
G1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 E-1.0000 F1800 ;Retract a bit
G1 Z2.0 F3000 ;Move Z Axis up
G1 E0.0000 F1800
There is a remake for the SE here:
https://www.printables.com/make/2479913?comment_id=2479913
(Thank you!!!!!)