Screen Ring for Round Opening of Vivarium or Terrarium Scale to Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like converting large glass containers into vivariums. This ring will hold a piece of screen to cover your container.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use these to cover my Vivariums. They can be glued into a lid or just set onto the container.
I originally made this for a glass vessel with a 115mm opening. Use this number to to determine what scale to use in your slicer.
D = Desired Width
S = Scaling in Slicer
D/1115*100 = S
Be sure to scale both parts the same amount.
Use the inner ring as a template to cut your screen or alternatively you can print the inner ring a bit smaller, press the screen into place with the ring and cut it afterward.
Outer ring needs to be printed top side down.