Heart Candle Holder Card Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,55 € – 3,12 € netto (bez VAT)
Dla pliku: Heart Card Kit_4_0.3mm_PLA_MK3S_2h14m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,83 € netto (środek widełek).
- Masa podana przez autora
- 48 g
- Czas druku podany przez autora
- 2,23 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A simple candle holder with a decorative heart display for valentine's day or other occasions you want to show affection
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 1119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was really impressed with some of the card kits that i have seen and decided to make my own for valentines day to show some appreciation to my spouse. She really likes candles and with valentine's day approaching, this card kit is what i came up with.
The card kit was designed to hold and ikea tea light (Glimma), which are ~39 mm in diameter. When assembled the hearts all line up and with the candle in the center. It is designed for a 2 color accent by doing a color swap at 2.6 - 2.7 mm z height to give a fancy accent to the hearts. There are two different holder options in the kit that align the hearts at different angles to give you the most options for placement and keep the desired alignment of the hearts. The smaller angle holder is when the assembled kit will be near eye level (seen straight on) and the larger angle holder is when the assembled kit will be below eye level (looking slightly down to see it)
The card kit will just fit on the MINI print bed.
If you are using a glass filament (not opaque) make sure you set infill to near 100% or increase the number of vertical shells otherwise when it is backlight by the candle you will see the infill pattern and it will look odd.
Assembly is straightforward. Start by putting the angled holder arm (hockey stick shape, chose whichever one gives you the best look) into the circular base with the full depth cut in it (looks loosely like pac man). Then put the heart shapes into the holder arm with the smallest heart in the front and the largest in the back. Finally, put the candle holder circle onto the vertical post of holder arm by inserting the post into the slot on the bottom of the candle holder circle.
I also have a collection of “deluxe” versions of this candle holder: https://www.prusaprinters.org/prints/129992-deluxe-heart-card-kit-collection