Load Cell Pedal MOD PXN PDHM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal. Totally plug and play
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 319
- Wydruki
- 0
- Wyświetlenia
- 1772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal.
It is totally plug and play, you don't need to change the original electronics.
It uses a inexpensive 50kg load cell a HX711 and a arduino micro.
I'm using it for at least 3 months so I feel that 3D printend pieces can handle the forces involved.
I bought a Yellow, 20x10x30mm spring on aliexpress and skate ruber dumpers, In the steps files there is a option to use these dumbers and other with out, I feel that these dumpers are not needed, but I cut one to use inside the spring, this make a big diferrence. So you have to insert some rubber inside a half or a third part of the spring.
