Rainbow vacuum caster wheel tire replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After many years of abuse the vulcanized tires of the wheels fall apart. These are replacement tires printed with TPU.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I printed them with TPU Hardness (Shore D) 55D.
If you want to print them from more flexible materials I would recommend scaling them down a little to get a tighter fit.
To take the wheel off the axle it worked best for me to put in forks on each side and push them in opposite direction. (picture 3)
I don’t know the exact model of the vacuum but it’s at least 10 years old.
I added gcode for multiple tires at once (sequentially), but the outer two turned into spaghetti. I guess because the bed temp might be less stable on the edges. I ended up printing them one by one.