1 / 2
Throom Rubber Plate Target Knockdown Bases
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of the pivoting bases that come with Throom targets, you can turn them into knockdown plates
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Instead of the pivoting bases that come with Throom targets, you can turn them into knockdown plates similar to MGM steel.
To create the stand for each target:
- Print 2 of the Target Stand Bracket, using PLA, PETG, etc.
- Cut two 3-4' 1x2s and one 18" as the horizontal.
- Use any normal target stand with the longer sticks as verticals.
- Clamp the brackets to the verticals and slide the horizontal across.
To convert a Throom target to knockdown:
- Print the two halves of the target base (left and right), using TPU.
- Remove the target from the pivoting base it came with.
- Slide the left and right halves over the cylindrical pivot at the base of the target.
- Tape the two halves together with durable tape (Gorilla, duct, etc).
Both prints should print without supports in the orientation they are in the files.