Telescopic Pocket Coat Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a small telescopic pocket coat hanger suitable for delicate blouses as well as for heavy jackets.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the Folding travel coat hanger https://www.printables.com/model/582695-folding-travel-coat-hanger I designed a new coat hanger fixing some issues.
The new telescopic pocket coat hanger is suitable for delicate blouses as well as for heavy jackets.
Update 09.06.2026:
Added a more stable version of the Center part, since the original version can breake if you use very heavy jackets or wet jackets.
Assembling:
For best results the Hook and the two connectors have tob be printed in a lying direction with a layer height of 0.1 mm. The telescopic CoatHanger has to be printed in a standing direction.
After printing it is necessary to remove the burrs of all parts and the z-seam of the CoatHangers.
Depending on the settings of the z-seam, the seams can melt together in one single point of the telesope, just cut it like this:
Insert the hook form the bottom of the Center part:
Insert one Connector to each CoatHanger paying attention to the right orientation:
Mount the Connectors with the Center part using two M3 screws of at least 18mm length and two cap nuts. You can use one drop of super glue in each cap nut to prevent unscrewing while using the Telescopic Pocket Coat Hanger:
