Shipping Shield Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desktop dispenser for Shipping Shield card protectors.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A dispenser for your desk, workbench or whatever place you use when packaging cards for shipping.
Fits the Classic Shields, should fit the Peel & Seal ones too, but I don't have any of those to confirm.
Load them up from the top and there is a slot at the bottom for you to pull them out as you need. Holds around 75 or so.
I printed in PLA, .4 nozzle, .2 layers, 15% infill. Supports are needed for the tabs.
Tolerances are pretty tight with the tabs and slots when assembling, you may need to either sand them down slightly, just give it a good press or maybe light taps with a rubber mallet. Just don't break the thing and get mad at me like I didn't warn you or something.