Qidi X Plus 3 Filament Sensor Relocation Mount (Enhanced Loading)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it more accessible by relocating it to the corner if you have your spool holder on the left side of the printer
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in PLA with 4 walls and 10% infill, this holder reuses the original screws to attach to the machine. However, you will need four additional M3 x 14mm screws to secure the sensor to the holder, as shown in the pictures.
You will also need to replace the filament tubing between the sensor and the print head with a 36" (91.4 cm) length of new tubing. I swapped mine for a more translucent tube to improve visibility, replacing the original blue tubing.
To accommodate the cable exiting from the back, you must create a notch either on the machine frame or on the cover. On my machine, I made the notch directly on the frame; it’s a bit untidy but functional. You can choose whichever option suits your setup. Unless you replace the cable with a longer one, making this notch is necessary. The pictures demonstrate that this solution works well.
After relocating the filament sensor and installing the new spool holder, loading filament is much easier.
Warning: If you replace the tubing, ensure it is long enough to reach the farthest positions your print head can travel. Before moving the print head fully forward and to the right, check that it is clear of any cameras or other attachments. I accidentally knocked and broke my camera bracket during this step, so proceed with caution.