Hercules DJControl Mix cover - protect your decks! (new v2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small cover for the DJControl Mix while in use to protect from spills.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
#ProtectYourDecks
Sometimes spinning a show, even ones on the go, you find yourself babying your delicate hardware. It's important! With this cover, you can protect your Hercules DJControl Mix while it's in use, helping to prevent damage from spills, food, and other hazards. As a side effect, it can also "reskin" your decks to whatever color you want.
Since this cover is designed to be used, abused, and replaced, I recommend printing it with the cheapest filament you own. I also recommend printing this facedown (no supports needed) if your printer is large enough.
If you like what you see, please consider leaving a Like or collecting. I'd love to see this printed on the real thing, too :)
Update!
I have created models that split the cover in two pieces, with tacks and a bar to connect them together if your build plate is too small for the whole thing. In doing so, I did make the cover 1mm taller, so the buttons aren't quite as raised anymore (or are now depressed inward, in the case of the power button). If you want the thinner one, v1 is still available but most printers are too small to print the cover all in one piece unless you tilt it and add supports, which kinda defeats the purpose.
In order to print the full cover in two pieces, use all three of the v2 files (excluding the one labeled -combined).
The model controller in the photo is v1 of this remix I made of the template model.