1 / 2
TRENDnet TEG-S80g (V3 and V4) 10 Inch Rack Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specific build of my parametric rack for the TRENDnet TEG-S80g v3.0R - V4.1R with two keystone ports.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (27)Powiązane
Print settings:
- 0.2mm layer height
- 3+ bottom layers and 4+ top layers
- 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle
- 10+% infill
- I used PETG. PLA should work fine but I'm not sure about the latch flexibility
Specific build of my parametric rack to work with the TRENDnet TEG-S80g v3.0R and v4.1R. V2 and V1 are different dimensions and will not work. Sized for a 150mm x 28mm x 97 mm (WxHxD) box.