1 / 4
Aprilia RS 457 Turn Signal Block Off Plate RS457 — zdjęcie 1
1 / 4

Aprilia RS 457 Turn Signal Block Off Plate RS457

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you…

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
288
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you can bolt this plate in place of the missing stalk using a 6mm nut.

These do not have to be very tight, just enough to hold them in place. I am using a nylock nut only because that's what I have around. A regular nut would work too. The threads are printed - Do not use any sort of thread locker on plastic parts.

Choose your own filament, but obviously it has to be decent and your printer should be calibrated for it. I'm using carbon fiber reinforced PETG and it works fine. Choose something with decent UV resistance if your bike will be used in sunlight...

Sometime in the future I will be adding one with a RAM ball attached so stay tuned if you go for that sort of thing.

Category: Automotive

Tagi