Bryton mount base for MTB stem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to mount a Bryton bike computer to an MTB stem. The mounts included with my Rider 450 were worthless for my YT…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is to mount a Bryton bike computer to an MTB stem. The mounts included with my Rider 450 were worthless for my YT Jeffsy, so I made this up to hold it on the stem. Once it's printed you can attach the stock Bryton 1/4 turn mount using the thicker rubber base and one of the larger rubber rings.
Print one of the posts and two buttons. Posts do not require supports but I did use them on the buttons. The difference between the two posts (V3 and V4) is V4 has a dog paw emboss on it. Orient parts as shown in the third photo.
Requires two 4 x 0.7 x 10 bolts to hold the buttons on the side of the post.
I have used this for almost 9 whole miles so far and it works great.
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
No
Category: Hobby