Ducati 900ss Hugger for 180 tire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hugger for a 1991 - 1998 Ducati 900ss that is wide enough to clear a 180 rear tire on a 5.5" rim. It will…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a hugger for a 1991 - 1998 Ducati 900ss that is wide enough to clear a 180 rear tire on a 5.5" rim. It will likely fit other size Super Sports from the same era. It's shown on a steel swingarm but should fit an alloy swingarm also. I'll try it on one later to be sure.
It is not a show piece, it doesn't fit the profle of the swingarm precisely (shown in photos), it was designed simply to keep debris from being tossed onto the shock on my trackbike.
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
No
Notes:
This was printed on a K1 Max (which is not a choice on the drop down menu) and it pretty much fills up a 300x300x300 build volume.
Choose your Z seam location wisely, that's the scratch looking thing on the top of this in the photos. I wasn't paying attention when I sliced this. Also note it has a dog paw embossed on it, you can see that in the same photo as the z-seam.
Category: Automotive