Star bookmark with name.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A girlfriend of mine her birthday is comming up, so I thought I would make her something she likes. She gave us…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A girlfriend of mine her birthday is comming up, so I thought I would make her something she likes. She gave us nicknames for a event. So i put those on the picture.
I will also upload a nameless model, so you can put a name on it yourself.
I also uploaded a starbookmark without a name plaque:
http://www.thingiverse.com/thing:1404960
Print Settings
Notes:
This size should be printed with a small nozzle, like a 0.25mm nozzle. Or the letters will look bad. I's are also hard to print because of the little dot on them (i). The extra amount of fillament extruded after a retract is too much and will make it look like a blob.
You could also scale it up to +-130% and print it with a 0.40mm nozzle just fine.
Category: Office