Tormek projection length jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to measure projection length on Tormek or similar sharpening machines
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This jig can be used to measure projection length when working with the calculator method on a Tormek or similar grinding machine.
Example calculator: https://connect.calcapp.net/?app=3fp8xu#/
The jig is designed to work with the Tormek KJ-45 knife jig.
The jig is my design. The T-Cube is the design of Perra over at the tormek forum.
The T-Cube can also be used to set the height of the support (Top of USB to stone, Top of USB to casing in the above calculator).
Additional parts needed:
- M8 knurled head screw or similar
- Measuring ruler 30mm wide (30cm long in my case)
Printing is straight forward. Jig prints as is without any support.
T-Cube needs support if printed with thread vertically.