6mm "banjo" shelf support and "plug"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement "banjo-style" shelf support
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My bathroom cupboards were missing a number of shelf supports. At the time I didn't know how to describe them to search for replacements, and it just seemed easier (not to mention more fun) to make a model and print some…
It looks like these fit 6mm holes. You want the “banjo” to be just flexible enough to squeeze into the hole, but with enough stiffness to then push out on the sides so that it stays in place. Printing in PLA on a Prusa i3 MK3S, I found that the “0.20mm QUALITY” preset in PrusaSlicer (0.2mm layer height, 2 perimeters, gyroid fill pattern) with an 80% infill worked well.