MK3 MK3S MK3S+ to MK4S - Cheap Upgrade with only printable parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In testing - Upgrade your Prusa i3 MK3S+ to MK4S with only printable parts for 8mm rod and MK3S Toolhead
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 2500
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
WIP: work in progress, only for testing.
With these parts you can upgrade your i3 MK3S+ (and similar) to MK4S with only printable parts: you can reuse all the 8mm rods, LM8UU and stock MK3S X-carriage (Toolhead).
LM8UU spacer - print x2
Rubber pad 20x10x1 mm - print 4x in TPU
BOM:
M3x25
M3x16
M3x20 wit cutted head or Pin H8 2.9x20 (for idler pulley)
Assembly:
Follow MK4S tutorial X-axis assembly
Bugfix:
V0.6 added “X Support Left - Endstop Fixed - Short Belt” for who has short X-belt
(X-motor is 8mm closer to the toolhead)
V0.5 added “X Support Left - Endstop Fixed” (STL and STEP) to align endstop X position to MK3 Toolhead (+5.75mm than MK4)
V0.4 reduced by 5mm the space for the Z bars to 320mm (stock MK3S).
Thanks to Samuel Valluš
V0.3 Fix: the rubber pad position was centered to the LM8UU.
Added a spacer between stock 2x LM8UU 24mm (48mm) instead using 1x LM10UU 55mm
V0.2 Bug: fixed square nut for left pom
