Korsar Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Korsar handle Hi-Cap modification
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like the handles of the Hi-Capa and Glock pistols. I decided to make myself a Hi-Cap grip. I took all the dimensions from the handle of the original model of the Hi-Capa airsoft pistol modification.
The handle turned out to be very comfortable for me, but there are also negative aspects, the handle is not suitable for 180 and 240 pistols. It can be installed, but due to the dimensions of the 180 and 240 pistols, you have to strain your hand too much, the center of gravity of the pistol is shifted too far forward. I made this handle for a 140 pistol.
I recommend that you print the handle using 4 perimeters and a linear filling of 15%. The material can be any. For the grooved side surface of the handle, I used modifiers and the fuzzy shell function. All this can be done in a slicer when slicing a model for printing.