London Pattern Screwdriver Handle for Narex Shank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle and ferrule for Narex #1 slotted or phillips screwdriver shank.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Based on sketch posted by Jonathan on The Bench Blog.
Narex #1 Phillips and slotted screwdriver shanks available from Northwest Passage Tools.
Suggest printing the ferrule in vase mode. It should be a press fit and only require a couple gentle taps with a mallet to seat. The shank is also press fit into the handle. Use a block of wood to protect the tip as you seat it. Obviously you want to make sure the wings are lined up with the slot as you push it in.
If I do say so, the London Pattern has a classic look and it feels great in the hand.