1 / 1
AR-15 Quad Magazine Wall Mounted Organizer 200x186x131mm — zdjęcie 1

AR-15 Quad Magazine Wall Mounted Organizer 200x186x131mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mounted rack for (4) AR-15 magazines, with a little extra flair!

Ocena
0 / 5
Polubienia
10
Pobrania
16
Wydruki
0
Wyświetlenia
353
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printed in PLA w 0.4mm nozzle. I found that has sufficient strength with 4 walls.

The version I uploaded is slightly larger than the one shown in the photo, and thus i did a slight angled trim at the corners to make it fit within a 220x220mm print bed. 
The dimensions are roughly 200x186x131mm

Orca removed the negative cylinders I created in the backing to accommodate for mounting screws, but those are easy to add according to your particular mounting pattern and bolt size. 

I will upload another version I created with Knight chess pieces as well! 

Tagi