1 / 1
HOOV (HoverHoof) - Hopefully your last Vibration Dampener! — zdjęcie 1

HOOV (HoverHoof) - Hopefully your last Vibration Dampener!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic Dampeners, not only good for audiophiles but also 3d printing :)

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
127
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
  • CURRENTLY STILL IN PROTOTYPING STAGE!

Hoov (HoverHoof) is an attempt on an optimal vibration dampener (hopefully our last) not only for speakers and audio equipment but also for 3d printers

i highly recommend using 3-4 footers with a heavy plate (concrete/thick wood) on top where you can place the printer on top

2-5Kg per Hoov

 

BOM (per Hoov):

3x 50x10mm 22mm inner diameter Ferrite Magnets

1x 40mm 20/10mm delrin(pom) or telfon(ptfe) rod

10x 8x4mm 4mm inner diameter N52 Neodym magnet

1x 55mm M3 Screw

2x M3 Washer

1x M3 Nut

(optional) 1x 3-6Kg (Yellow) Frankenschaum Sylo Dampener

 

Feel free to comment, like and share! :)

Tagi